adas2639
New member
BMW Group Tester One [GT1] is specially offered to the BMW workshops and service centre with the same specification that is currently supplied to BMW franchised dealers. It is the special-purpose diagnostic and programming tool of ALL BMW series.
GT1 is supplied with IBM T30 laptop for DIS [Diagnostic and Information System] and SSS [Software Service Station].
GT1 can cover ALL the systems of ALL BMW series cars. It is used to communicate with Electronic Control Unit [ECU] for diagnosis and programming. All the BMW cars with ECU system can be scanned by GT1 system, using DIS and be programmed using SSS. With GT1 system, you don’t need to split all the parts with fault in the BMW car. GT1 help you to read the fault code, and do diagnosis, programming. The BMW GT1 system allows you to reprogram all the BMW car ECUs to fix software or to install a blank ECU to repaired vehicle.
GT1 is only system that allows you to do this and is absolutely essential if working on Freelander. The GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launch in 2007
BMW GT1 software kit comprises of five systems, technical information system data, diagnostic and information system data, diagnosis system, measuring system and management system. You can test and check data information at the same time in GT1.
GT1 DIS for DIAGNOSIS SUPPORTED MODEL
Vechicle interface via OBD-II or 20-pin socket:
E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E87, E90, E91, E92, R50, R52, R53, R56.
GT1 SSS for PROGRAMMING SUPPORTED MODEL
Vechicle interface via OBD-II or 20-pin socket:
E31, E32, E34, E36, E38, E39, E46, E52, E53, E83, E85, E86, R50, R52, R53, R56.
GT1 WITH SOFTWARE
DIS Software, SSS Software, TIS Software, ETK (Electronic Part Catalog).
FUNCTION
Read faulty codes
Clear faulty codes
Data stream
Activate state
Programming
Component test
Maintenance data information
Component location
Wiring diagram etc, TIS and DIS supply all of system diagram of all of BMW car maintenance methode and coding information etc.
Call:
[021] 9945 7289
[0819] 058 63663
Working on the original software Mercedes Benz.
Totally the same with the original Benz diagnostic equipment except the cost.
Can diagnose all automobile Mercedes-Benz including lorries and buses. The cable for diagnosis purpose is produced on the basis of the parameter set by the original factory/
INTRODUCTION
MB Star 2010 is professional diagnosis equipment for Mercedes-Benz cars manufacture after year 2000. It is the replacement of HHT.
MB Star 2010 operates based on windows XP system.
MB Star 2010 realizes all the functions of official factory BENZ star 2010.
TESTABLE SYSTEM
ENGINE, AUTO-SPEED, AIR CONDITIONAL SYSTEM, SRS, ABS, ASR, MPL, GM, BENZ ORIGINAL ANTI-THEFT DASX SYSTEM, KEYLESS ENTERING SYSTEM, OBD-II SYSTEM, OTHER NEW SYSTEM, 100% AS SAME AS ORIGINAL DIAGNOSTIC STAR 2010.
FUNCTION
Reading trouble code, Erasing trouble code, Live-data, adaptation, Component testing, Maintenance, information consultation, Component location diagram, Wiring diagram, Coding the new ECU..
CONFIGURATION
* NOTEBOOK IBM REFURBISHED/ SIMILAR
* MULTIPLEXER
* 16 PIN OBD-II
* 38 PIN CABLE
* 14 PIN CABLE
* 4 PIN CABLE
* RS232 COMMUNICATION CABLE (NAVIGATION PORT)
ACRONYMS
WIS
(Workshops Information System)
Supply the whole view of the wiring diagram and maintenance. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model, all in detail.
STAR UTILITIES
(Movement management system)
DAS
(Automatically diagnose system)
Concise interface and straight forward operation with IBM high quality computer can realize the quick and accurate code reading and the whole car system testing.
Price IDR 35.000.000,-
Call
(021) 9945 7289 - (0819) 0586 3663
GT1 is supplied with IBM T30 laptop for DIS [Diagnostic and Information System] and SSS [Software Service Station].
GT1 can cover ALL the systems of ALL BMW series cars. It is used to communicate with Electronic Control Unit [ECU] for diagnosis and programming. All the BMW cars with ECU system can be scanned by GT1 system, using DIS and be programmed using SSS. With GT1 system, you don’t need to split all the parts with fault in the BMW car. GT1 help you to read the fault code, and do diagnosis, programming. The BMW GT1 system allows you to reprogram all the BMW car ECUs to fix software or to install a blank ECU to repaired vehicle.
GT1 is only system that allows you to do this and is absolutely essential if working on Freelander. The GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launch in 2007
BMW GT1 software kit comprises of five systems, technical information system data, diagnostic and information system data, diagnosis system, measuring system and management system. You can test and check data information at the same time in GT1.
GT1 DIS for DIAGNOSIS SUPPORTED MODEL
Vechicle interface via OBD-II or 20-pin socket:
E31, E32, E34, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E87, E90, E91, E92, R50, R52, R53, R56.
GT1 SSS for PROGRAMMING SUPPORTED MODEL
Vechicle interface via OBD-II or 20-pin socket:
E31, E32, E34, E36, E38, E39, E46, E52, E53, E83, E85, E86, R50, R52, R53, R56.
GT1 WITH SOFTWARE
DIS Software, SSS Software, TIS Software, ETK (Electronic Part Catalog).
FUNCTION
Read faulty codes
Clear faulty codes
Data stream
Activate state
Programming
Component test
Maintenance data information
Component location
Wiring diagram etc, TIS and DIS supply all of system diagram of all of BMW car maintenance methode and coding information etc.
Call:
[021] 9945 7289
[0819] 058 63663
Working on the original software Mercedes Benz.
Totally the same with the original Benz diagnostic equipment except the cost.
Can diagnose all automobile Mercedes-Benz including lorries and buses. The cable for diagnosis purpose is produced on the basis of the parameter set by the original factory/
INTRODUCTION
MB Star 2010 is professional diagnosis equipment for Mercedes-Benz cars manufacture after year 2000. It is the replacement of HHT.
MB Star 2010 operates based on windows XP system.
MB Star 2010 realizes all the functions of official factory BENZ star 2010.
TESTABLE SYSTEM
ENGINE, AUTO-SPEED, AIR CONDITIONAL SYSTEM, SRS, ABS, ASR, MPL, GM, BENZ ORIGINAL ANTI-THEFT DASX SYSTEM, KEYLESS ENTERING SYSTEM, OBD-II SYSTEM, OTHER NEW SYSTEM, 100% AS SAME AS ORIGINAL DIAGNOSTIC STAR 2010.
FUNCTION
Reading trouble code, Erasing trouble code, Live-data, adaptation, Component testing, Maintenance, information consultation, Component location diagram, Wiring diagram, Coding the new ECU..
CONFIGURATION
* NOTEBOOK IBM REFURBISHED/ SIMILAR
* MULTIPLEXER
* 16 PIN OBD-II
* 38 PIN CABLE
* 14 PIN CABLE
* 4 PIN CABLE
* RS232 COMMUNICATION CABLE (NAVIGATION PORT)
ACRONYMS
WIS
(Workshops Information System)
Supply the whole view of the wiring diagram and maintenance. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model, all in detail.
STAR UTILITIES
(Movement management system)
DAS
(Automatically diagnose system)
Concise interface and straight forward operation with IBM high quality computer can realize the quick and accurate code reading and the whole car system testing.
Price IDR 35.000.000,-
Call
(021) 9945 7289 - (0819) 0586 3663
